Everpure Conserv 75E High Efficiency Reverse Osmosis System

£1,440.00

The new Everpure Conserve RO system is the first true plug and play RO system. Takes less than 20 minutes to install and the easy to adjust system allows you dial in your desired TDS with remarkable accuracy. No engineers needed to install means you save on installation costs.

Its small foot print means it can be easily retro-fit into any cafe. Can add an additional storage tank up to 20L. 

Typical installation would feed one espresso machine 1 to 4 group and one batch brewer. Also an outlet for just filtered water, great for drinking water or pitcher rinser.

Everpure Conserv 75E High Efficiency Reverse Osmosis System, designed for espresso and combination applications, combines true corrosion and scale protection in one solution. This compact system combines a carbon filter, scale inhibitor, calcite feeder, carbon post filter and blending to create the right balance of minerals to prevent both corrosion and scale formation, differentiating itself from conventional RO systems. It is a reliable, simple to install and easy to operate solution that helps end users meet equipment manufacturer's water specification requirements, reduces warranty claims, increases equipment life and customer satisfaction.

Features include:

  • Up to 50% water savings over conventional RO systems
  • Permits tailored blending of incoming water to produce the ideal mineral content for better-tasting  espresso and coffee
  • Improves equipment life and performance by removing 95%+ of all dissolved solids that cause corrosion and scale buildup
  • Heating surfaces maintain peak heat transfer efficiency, reducing cycle times and energy consumption
  • Protects against taste- and odor-causing contaminants while removing dirt, particulates and dissolved minerals
  • Less frequent deliming of equipment means reduced maintenance and service costs
  • Compact design allows for wall mount, countertop or undercounter installation
  • Sanitary cartridge replacement is simple, quick and clean; internal filter parts are never exposed to handling or contamination
  • Adaptable for ice applications via prefilter inlet
  • NSF/ANSI Standard 58 certified to reduce cysts such as Cryptosporidium and Giardia by mechanical means*

  • Proprietary Fibredyne II filtration media effectively inhibits the growth of bacteria on the filter media that can decrease product life*

Other Features:

  • Chlorine taste & odor reduction
  • Hardness reduction
  • Reverse osmosis
  • Scale reduction
  • TDS reduction

Specifications:

  • Daily Production Rate: 50.51 gpd (191.20 Lpd)
  • Overall Dimensions: 18.69" H x 16.97" W x 10.37" D (47.5 cm x 43.1 cm x 26 cm)
  • Inlet/Outlet Connections: 3/8" OD John Guest® fitting
  • Wastewater Line Connection: 1/4" OD John Guest fitting
  • Water Supply: 0.5 gpm @ 50 – 85 psi (1.9 L @ 3.4 – 5.8 bar)
  • Pressure Requirements: 40-85 psi (2.7 – 5.8 bar), non-shock
  • Inlet Temperature: 32-100°F (0 – 37.7°C)
  • Inlet TDS: 1,000 ppm maximum
  • Operating Weight: 53 lbs (24.04 kgs)
  • Wastewater Production: 14 – 20 gpd @ 60 psig, 77°F (53 – 75 Lpd @ 414 kPa, 25°C)
  • Wastewater Drain Line Capacity: 0.05 gpm (200 ml/m) to open atmosphere
  • Storage Tank Capacity: 2 gallon tank; effective/usable capacity 1 gallon (3.8 L)
  • Electrical: 100-240VAC/50-60Hz switchable power supply

Drawings:

Everpure Conserv 75E

Read More