Celli Recessed Pitcher Rinser

The Celli Recessed Pitcher Rinser is a stainless steel in-bench milk jug rinser from Celli, one of Italy's most established commercial bar equipment manufacturers. Available in 300mm and 400mm lengths, it installs flush into the countertop to give baristas an always-accessible rinsing and draining point directly at the espresso station. The integrated drip tray is a practical detail that sets this rinser apart — after rinsing, excess water can be drained directly into the tray rather than pooling on the bar surface, keeping the workstation cleaner and drier between drinks.

Integrated Drip Tray

Unlike many recessed rinsers that are simply a sink with a spray nozzle, the Celli rinser combines the rinser basin with a full drip tray. This means pitchers can be rinsed and then held over the tray to drain completely before being set down — a small but meaningful workflow improvement that keeps both the pitcher and the bar surface drier during busy service.

Simple, Reliable Operation

The rinser operates entirely on water pressure — no electrical supply is required. Press the pitcher down onto the central nozzle and water pressure drives the spray to clean the inside of the vessel. The system requires a minimum supply pressure of 2 bar, which is standard on commercial bar plumbing. The 30mm profile sits low in the counter, keeping the unit unobtrusive when not in use.

Available in Two Sizes

The 300mm version (300mm x 180mm x 30mm) suits single-group espresso machines and smaller café stations. The 400mm version (400mm x 180mm x 30mm) provides a wider rinsing area for higher-volume setups or bars where larger pitchers are in regular use. Both sizes share the same 30mm depth profile and installation connections.

Made in Italy by Celli

Celli is a respected Italian manufacturer of professional bar equipment, with a long track record supplying commercial hospitality environments across Europe. Their pitcher rinsers are built to the quality standards expected of equipment destined for high-volume daily use in professional bars and cafés.

Frequently Asked Questions

What sizes are available and how do I choose?

The Celli Recessed Pitcher Rinser is available in 300mm and 400mm lengths, both at 180mm wide and 30mm deep. The 300mm version suits most single-group espresso machines and standard café setups where one or two pitchers are rinsed at a time. The 400mm version is better suited to busier environments, twin-group machines, or anywhere a wider rinsing area improves workflow. Both sizes use identical installation connections and the same 30mm depth profile.

What makes this different from the Rhino recessed rinsers?

The main practical difference is the integrated drip tray. The Celli rinser combines the rinsing basin and drip tray in a single flush-mounted unit, so pitchers can be rinsed and drained in the same spot without water spilling onto the bar surface. The Rhino Spinjet rinsers use a more advanced rotating spray valve for superior mechanical cleaning performance, while the Celli uses a straightforward pressure-fed nozzle.

What are the installation requirements?

The rinser requires a countertop cutout and in-bench installation. The water inlet is a 3/8" John Guest push-fit connection, and the drain is a 1/2" barb drain. A minimum water pressure of 2 bar is required for the spray to operate correctly. No electrical supply is needed. It is strongly recommended to have the physical unit on site before cutting into the counter, as dimensions can vary slightly in manufacturing.

Is a plumbing kit included?

No — the rinser does not include a plumbing kit as standard. A compatible plumbing kit can be added separately. As with all recessed rinser installations, it is recommended to have the unit on hand before cutting the countertop.

Is it suitable for rinsing vessels other than milk pitchers?

Yes. The central nozzle design allows it to rinse any vessel that fits over the spray head — including keep cups, small jugs, shot glasses, and cocktail shakers. It is a versatile bar tool beyond purely coffee service.

Who makes the Celli Recessed Pitcher Rinser?

Celli is an Italian manufacturer of professional bar and dispensing equipment. Their products are made in Italy and are widely used in commercial hospitality environments across Europe. The Celli pitcher rinser range is a long-established part of their bar equipment offering.